13

Chainsaw courses Cumbria

Sort by
YOUR CURRENT SELECTION
  • Classroom-based in Cumbria
  • Chainsaw
WHERE TO STUDY
England 115
Cumbria 13
Town/City
METHODOLOGY
  • All 13
  • Online/Distance 0
  • Classroom-based 13
  • Blended 0
  • Inhouse 0
COURSE TYPE
  • All 13
  • Course 12
  • Training 1
SUBJECT AREA
  • Industry and Science 13
  • Course
  • Wigton
  • 5 Days

...Learning Outcomes: Identify, inspect and comment on key parts of the chain saw Prepare the chain saw for work safely without risk to themselves... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 3 Days

...CS39: Use of a Chainsaw from a Rope and Harness. The candidate will be the climber and will be referred to as either the candidate or the climber in the following guidance... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 2 Days

...Learning Outcomes: Identify, inspect and comment upon key parts of the equipment to be used. Prepare the equipment for use ensuring the safety of themselves... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 3 Days

...of Work Equipment Regulations (PUWER) 1998, any ancillary equipment used for this assessment must also comply with relevant requirements of the Lifting... More


Price on request
Add to comparator
  • Training
  • Wigton
  • 3 Days

...Learning Outcomes: Identify the Risk Assessment and Emergency procedures on a work site Select and prepare equipment required for safe and effective felling... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 3 Days

...a hand held or tractor mounted powered hedge trimmer, working competently using correct tools and equipment safely and observing all relevant health... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 3 Days

...appropriate to saw model Appropriate felling aids (e.g. felling lever, wedges, sledge hammer etc.) An adequate tool kit for field maintenance In addition... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 2 Days

...not connected to a circuit A minimum of two poles must be prepared and felled using an appropriate method Candidates must successfully achieve all Assessment... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 3 Days

...Learning Outcomes: Identify the Risk Assessment and Emergency procedures on a work site Select and prepare equipment required for safe and effective felling... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 2 Days

...Learning Outcomes: Identify the Risk Assessment and Emergency procedures on a work site Select and prepare equipment required for safe and effective felling... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 2 Days

...(within twelve months) trees/root plates under tension one at least with a minimum diameter of 15”(Simulation may be necessary on side tension and forward leaning root plates)... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 2 Days

...An adequate tool kit for field maintenance In addition to the relevant requirements of the Provision and Use of Work Equipment Regulations (PUWER)... More


Price on request
Add to comparator
  • Course
  • Wigton
  • 2 Days

...Learning Outcomes: Apply key aspects of a Risk Assessment which apply to maintaining and running Agricultural and Horticultural machines Carry out routine... More


Price on request
Add to comparator