CPCS A17c Telescopic Handler - 5 Day Novice Course

Learning outcomes

On completion of this unit, the candidate will be able to:

• Identify the basic construction, purpose and function of components and the purpose and use of all controls and gauges.
• Identify and comply with manufacturers' instructions in accordance with the operator's handbook, other information sources i.e. load charts and applicable legislation.
• Explain all relevant documentation.
• Carry out pre-use and running checks.
• Configure the telescopic-handler for site and road travel.
• Travel over differing types of terrain, including rough undulating ground (not applicable to industrial telescopic) and substantial inclines, both with and without a load.
• Manoeuvre in confined areas using forward and reverse direction, both with and without a load.
• Set the telescopic handler in order to lift various loads.
• Lift various loads within the full working range of the telescopic handler.
• Ensure load integrity and security.
• Transport loads.
• Place and retrieve loads accurately at various points.
• Place and retrieve loads from vehicle bed or trailer.
• Explain precautions to be taken for overhead services and other hazards.
• Keep within safe working parameters.
• Place the machine in an out-of-service condition.
• Explain the loading and unloading procedure on and off a transporter.

Examination and Certification

To achieve the learning outcomes the candidate must complete a theory test and a practical test.
Successful candidates will be entered into the NPORS and CPCS scheme.

Instructor : Candidates : Machine
1 : 3 : 1