One Day Workshop for PEAP Authentication of Windows 7 Supplicant using a Cisco Switch as Authenticator and Windows 2008 R2 Server Training Course

Nobleprog (uk) Limited
In City Of London, Manchester, Birmingham and 12 other venues

£1,000
Want to speak to an Advisor about this course?

Important information

Typology Course
Location At 15 venues
Description

This one day workshop covers the configuration and operation of the IEEE802.1x protocol in the authentication and authorisation of a wired Windows 7 supplicant. The authenticator is a Cisco Switch and the server is Windows NPS running on Windows 2008 R2 server, operating as a Certification Authority (CA). The EAP protocol is Protected EAP (PEAP) and a successful request will be allocated a VLAN on the switch via RADIUS attributes received from the server following successful authentication. The procedure for a wired supplicant is almost identical to that of a wireless supplicant.
Audience:
Suitable for network planners, engineers or anyone interested in operation of PEAP with Cisco IOS Devices and NPS.

Venues

Where and when

Starts Location
On request
Aberdeen
Aberdeen City, Scotland
See map
On request
Belfast City
County Antrim, Northern Ireland
See map
On request
Birmingham
West Midlands, England
See map
On request
Brighton and Hove
East Sussex, England
See map
On request
Bristol
Gloucestershire, England
See map
See all (15)
Starts On request
Location
Aberdeen
Aberdeen City, Scotland
See map
Starts On request
Location
Belfast City
County Antrim, Northern Ireland
See map
Starts On request
Location
Birmingham
West Midlands, England
See map
Starts On request
Location
Brighton and Hove
East Sussex, England
See map
Starts On request
Location
Bristol
Gloucestershire, England
See map
Starts On request
Location
Cardiff
Cardiff, Wales
See map
Starts On request
Location
City Of London
Token House, 11-12 Tokenhouse Yard, EC2R 7AS, London, England
See map
Starts On request
Location
Exeter
Devon, England
See map
Starts On request
Location
Glasgow
Glasgow, Scotland
See map
Starts On request
Location
Leeds
West Yorkshire, England
See map
Starts On request
Location
Liverpool
Merseyside, England
See map
Starts On request
Location
Manchester
King Street, M1 5AN, Greater Manchester, England
See map
Starts On request
Location
Newcastle upon Tyne
Tyne and Wear, England
See map
Starts On request
Location
Oxford
Oxfordshire, England
See map
Starts On request
Location
York
North Yorkshire, England
See map

Frequent Asked Questions

· Requirements

Knowledge of Cisco IOS is essential. Knowledge of AAA and IEEE802.1x would be highly advantageous. Workshop could be extended to 2 days if pre-reqs are not fully met.

What you'll learn on the course

Windows
Cisco
Server
Network
Protocol
Switches
IP
Install
Network Training
Wireless

Course programme

Objectives
  • Review the operation of IEEE802.1x process.
  • Configure Cisco Switch to use IEEE802.1x and RADIUS.
  • Configure Cisco Switch to authorise VLAN assignment via RADIUS attributes from server.
  • Configure Windows 7 supplicant for dot1x authentication and install certificate from CA as a trusted computer certificate.
  • Configure connection request and network policies on NPS to authenticate and to pass VLAN assignment to switch.
  • Configure Windows users/groups on Windows 2008 R2 server to enable NPS authentication.
  • Configure Windows 2008 R2 server as a DHCP server.
  • Configure ip helper addresses and inter-VLAN routing on Cisco L3 switch.
  • Test successful PEAP authentication and PING PCs in different VLANs.
Equipment used in Practical Sessions:

Cisco L2 and L3 switches running v12 of IOS. Windows 2008 R2 server running Network Policy Server (NPS).

Additional information

7 hours (usually 1 day including breaks)

Students that were interested in this course also looked at...
See all