Introduction to Software Safety
Course
In Wincanton
Description
-
Type
Course
-
Level
Beginner
-
Location
Wincanton
-
Duration
1 Day
At the end of this introductory course, the participants will have a clearer understanding of how to plan for safety in a safety-related development programme, identify safety issues up-front, and know where to find help when an issue is beyond their expertise.
Facilities
Location
Start date
Start date
Reviews
Course programme
Introduction to Software Safety
Introduction
The Introduction to Safety course will provide delegates with a general
appreciation of safety engineering issues in the context of a typical systems
development life-cycle.
Session 1 - Introduction to Safety (15 min)
Session 2 - The Need for Safety (60 min)
- TO 2.1 Complex, software intensive systems difficult to develop.
- TO 2.2 Examples of system failure leading to fatal accidents; Examples of software failures leading to accidents.
- TO 2.3 Safety Management Systems.
- TO 2.4 H&S focus is physical hazards.
- TO 2.5 Functional safety focus is system functional failures.
- TO 2.6 Using People, Procedures and Equipment (HW, FW & SW).
Session 3 -Basic Concepts (60 min)
- TO 3.1 Safety Definitions (from IEC 61508); Risk Definition; As Low As Reasonably Practicable (ALARP).
- TO 3.2 Risk Matrix; Typical Accident Sequence.
- TO 3.3 Error Definition; Fault Definition; Failure Definition.
- TO 3.4 Random and Systematic Failures; Hazard Definition.
Session 4 - System Safety Assurance (90 min)
- TO 4.1 System Safety:
- Hardware
- Software
- Human Factors.
- TO 4.2 Safety Requirements:
- Functional Safety Requirements
- Safety Integrity Levels.
- TO 4.3 Safety Life-Cycle; Safety Cases; Safety Argument; Safety Evidence.
- TO 4.4 Describe the typical contents of a Safety Management Manual and explain the safety processes and responsibilities detailed therein.
Session 5 - Hazard Analysis Overview (120 min)
- TO 5.1 Functional System Description
- TO 5.2 Identifying Credible Accidents
- Examples.
- TO 5.3 Preliminary Hazard Identification
- Example HAZOPS.
- TO 5.4 Accident Sequences
- Example Event Tree Analysis.
Session 6 - Risk Assessment Overview (120 min)
- TO 6.1 Accident Target Setting
- TO 6.2 Residual Hazard Risks Calculation
- TO 6.3 Target Setting:
- Tolerable Hazard Occurrence Rates (THOR)
- Safety Target On Function (STOF)
- Safety integrity Levels.
- TO 6.4 Causal Factors identification (Fault Tree Analysis)
- TO 6.5 Safety Target Achievement
Session 7 - Safety Management (60 min)
- TO 7.1 Standards and Markets:
- System Safety Standards
- Software Safety Standards
- Firmware Safety Standards.
- TO 7.2 Integrating Safety Management
- TO 7.3 Safety Assurance Processes; Safety Achievement Processes; Safety Promotion Processes.
Course Critique.
Additional information
Introduction to Software Safety