Cisco CCNP Implementing Cisco IP Routing (Route) v2.0 Training

COURSE CURRICULUM

Routing Services

• Complex Enterprise Network Frameworks, Architectures, and Models
• Creating, Documenting, and Executing an Implementation Plan
• Overview of IP Routing
• RIPNG

Configuring the Enhanced Interior Gateway Routing Protocol

• Understanding EIGRP Terminology and Operation
• Planning EIGRP Routing Implementations
• Configuring and Verifying EIGRP
• Enable EIGRP Routing
• Define EIGRP Networks
• Define Bandwidth on Interfaces
• Enable and Disable EIGRP Automatic Summarization
• Passive Interface
• IP Default Network
• Configure a Router to Advertise a Default Route as the Gateway
• Example of the IP Route Next Hop Command
• Example of the IP Route Quad Zero Command
• Summarization in Discontiguous Networks
• Configuring and Verifying EIGRP in an Enterprise WAN
• Disabling Automatic Summarization
• Frame Relay Using Dynamic Mapping
• EIGRP over Layer 3 MPLS VPNs
• EIGRP over Layer 2 MPLS VPNs
• Configuring and Verifying EIGRP Authentication
• Configure Authentication Mode for EIGRP
• Configure the Key Chain
• Optimizing EIGRP Implementations
• Enable Authentication to use the Key Chain
• EIGRP

Configuring the Open Shortest Path First Protocol

• Understanding OSPF Terminology and Operation
• OSPF Packets
• Planning OSPF Routing Implementations
• Basic OSPF Verification and Configuration
• Configuring Single Area OSPF
• Configuring Multi Area OSPF
• EIGRP over Layer 3 MPLS VPNs
• OSPF Network Types
• Assigning Router Priority
• Override the Default Interface Cost
• Configure a Key for Simple Authentication
• Configure the MD5 Key-ID and Key
• Verifying Simple Password Authentication
• OSPF

Manipulating Routing Updates

• Assessing Network Routing Performance Issues
• Using Multiple Routing Protocols on a Network
• Redistribution Supports All Routing Protocols
• Implementing Route Redistribution
• Redistribute Routes into RIP
• Redistribute Routes into OSPF
• Default Metric for Routing Protocols
• Redistributing Routes into EIGRP
• Applying Metric Values for EIGRP
• Modifying the Administrative Distance for all Routing Protocols
• Changing OSPF AD
• Controlling Routing Update Traffic
• Route Map
• Using Distribute Lists and Filter Incoming Routing Updates
• Defining a Filter for Outgoing Routing Commands
• Distribute List In or Out and Examples
• Distribute Lists to Avoid Route Feedback
• Fallbacks of Distribute Lists
• Using Prefix Lists

Implementing Path Control

• Understanding Path Control
• Similarities of ACLs and Prefix Lists
• Implementing Path Control using Offset-Lists
• Configuring a Prefix List
• Implementing Path Control Using Offset-Lists
• Verify Offset-Lists
• Implementing Path Control using IOS IP SLAs
• Cisco IOS IP SLAs
• IP SLAs Applications
• Operations – Responders and Sources
• IP SLAs Operations
• Steps to Deploying IP SLAs
• IP SLA – ICMP ECHO and ICMP ECHO Sub Commands
• IP SLA Schedules
• Define Tracking Objects to Track the State of IP SLAs Operations
• Configuring Track Delay
• Configure a Static Route for IP SLAs Tracking
• Verify IP SLAs using Method 1
• Verify IP SLAs using Method 2
• Implement Path Control using Policy-Based Routing
• Implement Path Control using Policy-Based Routing
• Configure PBR
• Logical PBR Operation
• Route-Map Commands for PBR
• Match Statements and Conditions
• Match Commands Used in PBR
• Specify Criteria to be Matched using Prefix Lists of ACLs
• Specify Criteria to be Matched by Packet Length
• Modify Matching Conditions using Set Statements
• Set Conditions
• Set Commands used in PBR
• Specify the Next Hop IP Address for Matching Packets
• Specify Interfaces Through which Packets Can be Routed
• Specify a List of Default Next-Hop IP Addresses
• Specify a List of Default Interfaces
• Mark Packets Using the IP ToS Field
• Set the 3 IP Precedence Bits in the IP Packet Header
• Set IP Precedence Parameters
• Identify a Route Map to Use for Policy Routing on an Interface
• Various Methods to Verify PBR
• Advanced Path Control Tools

Implementing a Border Gateway Protocol Solution for ISP Connectivity

• BGP Terminology, Concepts, and Operation
• EGP and IGP
• AS
• IANA
• RIRs
• AS Numbers
• Facts about BGP
• BGP Neighbors
• BGP Operational Overview
• BGP Use between ASs
• BGP and IGPs
• Connecting Enterprise Networks to Internet Service P
• Configuring BGP
• Questions for Deploying Routing and Connection
• Public IP Address Space
• Configure Static Routes
• Configure the Default Local Preference
• Define BGP as the IP Routing Protocol
• Router BGP Command Parameters
• Identify Peer Router to Establish a BGP Session
• Create a Peer Group
• Assign Neighbors as Part of the Peer Group
• Disable an Existing BGP Neighbor or Peer Group Relat
• Establish the IBGP Session Using a Loopback Interfac
• IBGP Source IP
• Increase the TTL for EBGP Connections
• Configure the Router as the Next Hop for a BGP Speak
• Verifying and Troubleshooting BGP
• Basic BGP Path Manipulation Using Route Maps
• Filtering BGP Routing Updates

Implementing Routing Facilities for Branch Offices and Mobile Workers

• Planning the Branch Office Implementation
• NAT
• Planning for Mobile Worker Implementations
• Routing Traffic to the Mobile Worker

Implementing IPv6 in the Enterprise Network

• Introducing IPv6
• Configuring and Verifying IPv6 Unicast Addresses
• Routing IPv6 Traffic
• Configuring Static Routing
• Configuring OSPFv3
• OSPFv3
• Configuring EIGRP for IPv6
• EIGRP for IPv6
• Multiprotocol BGP (MP-BGP)