Course not currently available

One Day Workshop for PEAP Authentication of Windows 7 Supplicant using a Cisco Switch as Authenticator and Windows 2008 R2 Server Training Course

Nobleprog Limited

Course

Online

£ 850 VAT inc.

The best Windows 2000 and XP courses

See all

See all

Description

  • Type

    Course

  • Methodology

    Online

This one day workshop covers the configuration and operation of the IEEE802.1x protocol in the authentication and authorisation of a wired Windows 7 supplicant. The authenticator is a Cisco Switch and the server is Windows NPS running on Windows 2008 R2 server, operating as a Certification Authority (CA). The EAP protocol is Protected EAP (PEAP) and a successful request will be allocated a VLAN on the switch via RADIUS attributes received from the server following successful authentication. The procedure for a wired supplicant is almost identical to that of a wireless supplicant.
Audience:
Suitable for network planners, engineers or anyone interested in operation of PEAP with Cisco IOS Devices and NPS.

About this course

Knowledge of Cisco IOS is essential. Knowledge of AAA and IEEE802.1x would be highly advantageous. Workshop could be extended to 2 days if pre-reqs are not fully met.

Questions & Answers

Add your question

Our advisors and other users will be able to reply to you

Fill in your details to get a reply

We will only publish your name and question

Reviews

Subjects

  • Windows
  • Cisco
  • Server
  • Network
  • Protocol
  • Switches
  • IP
  • Install
  • Network Training
  • Wireless

Course programme

Objectives
  • Review the operation of IEEE802.1x process.
  • Configure Cisco Switch to use IEEE802.1x and RADIUS.
  • Configure Cisco Switch to authorise VLAN assignment via RADIUS attributes from server.
  • Configure Windows 7 supplicant for dot1x authentication and install certificate from CA as a trusted computer certificate.
  • Configure connection request and network policies on NPS to authenticate and to pass VLAN assignment to switch.
  • Configure Windows users/groups on Windows 2008 R2 server to enable NPS authentication.
  • Configure Windows 2008 R2 server as a DHCP server.
  • Configure ip helper addresses and inter-VLAN routing on Cisco L3 switch.
  • Test successful PEAP authentication and PING PCs in different VLANs.
Equipment used in Practical Sessions:

Cisco L2 and L3 switches running v12 of IOS. Windows 2008 R2 server running Network Policy Server (NPS).

Additional information

7 hours (usually 1 day including breaks)

See related categories

One Day Workshop for PEAP Authentication of Windows 7 Supplicant using a Cisco Switch as Authenticator and Windows 2008 R2 Server Training Course

£ 850 VAT inc.

The best Windows 2000 and XP courses

See all

See all