-
All
-
Online
-
Filters
Electrical test inspection courses
-
Good service, great lectures and kind staff. Definitely, I would recommend SWET to anyone interested in increasing his knowledge.
← | →
-
Phil was the best tutor I had in 26 years over many courses. I would also like to thank Tony for the support given. Truly informative week!
← | →
-
I must say these guys totally changed my life. Thanks Phillip.
← | →
- Training
- Pyle
- Intermediate
- Different dates available
- 1 Day
.... This workshop is ideal for qualified electricians or installers wishing to update their knowledge of electrical installation testing and use of instruments... Learn about: Electrical Safety, 17th Edition, Electrical risks...
.... This workshop is ideal for qualified electricians or installers wishing to update their knowledge of electrical installation testing and use of instruments... Learn about: Electrical Safety, 17th Edition, Electrical risks...
-
Good service, great lectures and kind staff. Definitely, I would recommend SWET to anyone interested in increasing his knowledge.
← | → see all
-
Phil was the best tutor I had in 26 years over many courses. I would also like to thank Tony for the support given. Truly informative week!
← | → see all
-
I must say these guys totally changed my life. Thanks Phillip.
← | → see all
- HND
- (Leamington Spa)
- Different dates available
... credits) Mechanical Principles ( 15 credits) Electrical & Electronic Principles (15 credits) Advanced Computer-Aided Design Techniques ( 15 credits) Health... Learn about: Quality Training...
- HNC
- (Leamington Spa)
- Different dates available
... Principles Electrical & Electronic Principles Advanced Computer-Aided Design Techniques Health, Safety and Risk Assessment in Engineering Business Management... Learn about: Quality Training...
- Course
- Wolverhampton
- Different dates available
... on which electrical applications are based on. You will also learn how to verify electrical installations are safe to use and gain an understanding of how to complete relevant certificates required by...
- Course
- Norwich
- 3 Days
...Suitable for: This 24 hour course is designed for those technicians and engineers already practising eddy current inspections and qualified or experienced to a Level II standard...
- Course
- Wolverhampton
- Different dates available
... questions then this course is right for you! Throughout this course you will gain an understanding of the regulations electricians are legally bound to comply with and the scientific principles on which electrical applications are based on. You will also learn how to verify electrical installations are... Learn about: Construction Training...
- Short course
- Barnsley
- Intermediate
- Different dates available
- 1 Day
... Certificate in the Requirements for Electrical Installations (BS 7671 18th edition) (2382) This qualification is primarily aimed at practising electricians... Learn about: Index & Tables, Special Installations & Locations, Scope & Fundamental Principals...
- A Level
- Dungannon
...The Level 3 NVQ Diploma in Installing Electro technical Systems And Equipment gives the recognised benchmark for a qualified Electrician. Apprentices would be full time employed with an electrical contractor across four main areas; domestic sites, agricultural sites, commercial sites and industrial... Learn about: Full Time...
-
Phil has been an amazing teacher! His advice on what courses to take next in order to enter this industry were very good. Although the information on the internet is very unclear, SWET have helped me a lot to understand the market and industry I want to work in. In the near future I will do another course with them and leave another good review, I am sure!
← | →
- Vocational qualification
- Pyle
- Different dates available
- 5 Days
...Are you ready to work in the Electrical Industry? SWET offers this vocational qualification with which you will enter this industry full of confidence, knowledge and skills. The main goal is to prepare candidates for the City & Guilds 2395 Examination and completion of the Electrical Installation... Learn about: City & Guilds, Electrical Installation, South Wales...
...Are you ready to work in the Electrical Industry? SWET offers this vocational qualification with which you will enter this industry full of confidence, knowledge and skills. The main goal is to prepare candidates for the City & Guilds 2395 Examination and completion of the Electrical Installation... Learn about: City & Guilds, Electrical Installation, South Wales...
-
Phil has been an amazing teacher! His advice on what courses to take next in order to enter this industry were very good. Although the information on the internet is very unclear, SWET have helped me a lot to understand the market and industry I want to work in. In the near future I will do another course with them and leave another good review, I am sure!
← | →
- Course
- (Leamington Spa)
- Different dates available
... in Principles of Installation, Commissioning and Maintenance (Electrical/Mechanical). What modules are covered? Certification is met by successful completion... Learn about: Quality Training, Mechanical Maintenance, Part Time...
- Training
- Harlow
- Intermediate
- 3 Days
... certification in the 17th Edition BS7671 Wiring Regulations. Covering comprehensively the 17th Edition of the Wiring Regulations, City and Guilds 2382-15 is widely recognised throughout the electrical industry as the “must have” qualification. It is seen by many in the industry as a mandatory requirement... Learn about: Basic Skills, Basic electrical...
- Course
- Bolsover
- 4 Days
... this course. Suitable for: Aimed at anyone involved in the design, construction and inspection and testing of electrical systems...
- Course
- Bolsover
- 4 Days
...We are proud of our extremely high pass rate of all students taking this course. The course is three and a half days, as per the City and Guilds guided learning hours with the examination on the afternoon of day four. Suitable for: Anyone involved in the design, construction and inspection... Learn about: 17th Edition...
-
I need to finish my apprenticeship, yet I would prefer not to finish my learning. I have as of now began my HNC in the second year of my apprenticeship, which is a genuine accomplishment. I will continue developing to advance in my vocation and secure a superior life for my young family.
← | →
-
Without uncertainty, an apprenticeship was the best choice I ever took for my vocation. I feel I am in an ideal situation now than if I went to college for a degree, because of beginning on a 4 year apprenticeship and gaining such a great amount from the shop floor upwards.
← | →
-
After finishing the General Certificate of Secondary Education (GCSE) with good marks, I decided to study an Apprenticeship related to engineering and particularly to power engineering. My carrer advisor game me a list of training providers and Appris was the most appealing one. I applied for an apprenticeship with a company named Switchgear & Instrumentation (now Powell Industries).
Thanks to Appris I was able to develop myself, become more self-independent and responsible as I received a task. By the end of my apprenticeship, not only had I gained experience with NVQ, but I had also obtained recognized qualifications i.e. HNC and HND. In addition to that, I was financially rewarded as I got a salary. I thank Appris for leading me through the right path.
← | →
- Short course
- Bradford
- Advanced
- Different dates available
- 4 Days
... course is held over a four-day block period, with one additional day for the practical course and another day for the evening written exams. During those four days a wide range of topics will be covered, including the safe isolation of electrical circuits and installations, the requirements for initial... Learn about: Electrical Installations, Inspection of Electrical Installations, Systems Engineering Management...
... course is held over a four-day block period, with one additional day for the practical course and another day for the evening written exams. During those four days a wide range of topics will be covered, including the safe isolation of electrical circuits and installations, the requirements for initial... Learn about: Electrical Installations, Inspection of Electrical Installations, Systems Engineering Management...
-
I need to finish my apprenticeship, yet I would prefer not to finish my learning. I have as of now began my HNC in the second year of my apprenticeship, which is a genuine accomplishment. I will continue developing to advance in my vocation and secure a superior life for my young family.
← | → see all
-
Without uncertainty, an apprenticeship was the best choice I ever took for my vocation. I feel I am in an ideal situation now than if I went to college for a degree, because of beginning on a 4 year apprenticeship and gaining such a great amount from the shop floor upwards.
← | → see all
-
After finishing the General Certificate of Secondary Education (GCSE) with good marks, I decided to study an Apprenticeship related to engineering and particularly to power engineering. My carrer advisor game me a list of training providers and Appris was the most appealing one. I applied for an apprenticeship with a company named Switchgear & Instrumentation (now Powell Industries).
Thanks to Appris I was able to develop myself, become more self-independent and responsible as I received a task. By the end of my apprenticeship, not only had I gained experience with NVQ, but I had also obtained recognized qualifications i.e. HNC and HND. In addition to that, I was financially rewarded as I got a salary. I thank Appris for leading me through the right path.
← | → see all
- Course
- Barrow-in-Furness
- 4 Days
...Subjects covered include; safety, selection & erection of equipment, inspection & testing to meet the needs of the IEE Wiring Regulations. Suitable for: Practicing electricians or those that have a working knowledge of BS7671...
- Course
- Colwyn Bay
- 4 Days
...This 4 day course is run at our Deeside Centre, Zone 1 Deeside Industrial Park over 3 weeks, 2 days first week 11th & 12th Feb one weeks break for revision then 20th & 21st feb 2012. Suitable for: Anyone within the Electrical Industry as well as others who require working knowledge of BS7671 Wiring...
-
Fantastic Set up, the training is delivered expertly but in an understandable way which helps the average Joe like myself. Already looking at more courses to continue with expanding my qualifications.
← | →
- Training
- Blended in Hull
- 3 Days
...The candidate will be able to: State the need for and the purpose of initial verification and periodic inspection and testing. State the information required to correctly conduct the inspection and testing of an installation. State the statutory and non-statutory requirements and relevant guidance...
...The candidate will be able to: State the need for and the purpose of initial verification and periodic inspection and testing. State the information required to correctly conduct the inspection and testing of an installation. State the statutory and non-statutory requirements and relevant guidance...
-
Fantastic Set up, the training is delivered expertly but in an understandable way which helps the average Joe like myself. Already looking at more courses to continue with expanding my qualifications.
← | →
-
First I would like to say that the course centre is clean and the facilities are of a very high standard.
The 2394/2395 course which I attended was a very difficult course to pass with a national pass rate of 35% so I was a little bit worried to say the least, but when we started the course the lecturer reassured me that all be ok as all as I was willing to learn.
The course was run for a full six days including the Saturday for the on line exam the trainer fully went through the process of the on line exam so when I clicked to start the exam I was fully aware of how to complete the test.
The course itself we had loads of videos to watch and regulations to read but trainer made this enjoyable by talking after each video and asking some very involved questions which kept my attention.
We also had to do the city and guilds practical test I had a pre run through first on the board with trainer, he was so good ,he went through everything.
← | →
- Course
- Basildonandanother venue.
- Basildon
- Advanced
- Different dates available
- 6 Days
... installations. It is advisable that candidates for this course have solid electrical experience and achieved their 17th Edition Certificate... Learn about: C&G 2394-01, Produce condition report, Energised installations testing...
... installations. It is advisable that candidates for this course have solid electrical experience and achieved their 17th Edition Certificate... Learn about: C&G 2394-01, Produce condition report, Energised installations testing...
-
First I would like to say that the course centre is clean and the facilities are of a very high standard.
The 2394/2395 course which I attended was a very difficult course to pass with a national pass rate of 35% so I was a little bit worried to say the least, but when we started the course the lecturer reassured me that all be ok as all as I was willing to learn.
The course was run for a full six days including the Saturday for the on line exam the trainer fully went through the process of the on line exam so when I clicked to start the exam I was fully aware of how to complete the test.
The course itself we had loads of videos to watch and regulations to read but trainer made this enjoyable by talking after each video and asking some very involved questions which kept my attention.
We also had to do the city and guilds practical test I had a pre run through first on the board with trainer, he was so good ,he went through everything.
← | →
- Training
- Pyle
- Intermediate
- 2 Days
...Emagister adds to its catalogue the Inspection & Testing - Periodic Inspection & Testing, the course aims to become familiar with the process of Periodic Inspection & Testing and to complete an Electrical Installation Condition Report. If you want to enjoy all these advantages, contact us through... Learn about: EV Charging, Section 722 BS7671, Electric Vehicles...
-
This course is an excellent option for those mechanical technicians who are seeking to gain knowledge on maintenance of electrical installations and confirm their competences with the C&G 6394.
← | →
- Course
- Basildon
- Different dates available
- 12 Days
... to perform certain electrical tasks safely. It is split into two parts of four course days each, which are delivered with a gap in between to allow candidates to make use of the knowledge gained... Learn about: Electricity at Work Regulations, Continuity testing, Tsting of RCDs...
... to perform certain electrical tasks safely. It is split into two parts of four course days each, which are delivered with a gap in between to allow candidates to make use of the knowledge gained... Learn about: Electricity at Work Regulations, Continuity testing, Tsting of RCDs...
-
This course is an excellent option for those mechanical technicians who are seeking to gain knowledge on maintenance of electrical installations and confirm their competences with the C&G 6394.
← | →