Cisco CCNP 300-115 – SWITCH – Implementing Cisco IP Switched Networks

What’s in the course?

Module 1 Plan And Design

1.1 Course And Instructor Introduction
1.2 Planning For Complex Network ­Part 1
1.3 Planning For Complex Network­ Part 2
1.4 Intro To Cisco Enterprise Architecture And CAM – Part 1
1.5 Intro To Cisco Enterprise Architecture And CAM – Part 2
1.6 Review Networking Topology
1.7 Review OSI Model
1.8 Review SLA
1.9 Network Discovery
1.10 NTP Explained
1.11 Network Security ­Part 1
1.12 Network Security­ Part 2

Module 2 Switch Configuration

2.1 VLAN And Trunking ­Part 1
2.2 VLAN And Trunking­ Part 2
2.3 VTP Intro And Config
2.4 Ether Channel Configuration And Load Balancing
2.5 More Ether Channel Configuration
2.6 Port Security
2.7 Root Guard
2.8 Configuring MST

Module 3 IP Configuration

3.1 DHCP Intro And Config ­Part 1
3.2 DHCP Intro And Config­ Part 2
3.3 IPV6 Intro And Config ­Part 1
3.4 IPV6 Intro And Config­ Part 2
3.5 Configure DHCP
3.6 Configure DHCPV6
3.7 Confiure IPSLA
3.8 NTP Configuration
3.9 Network Monitoring Using IPSLA

Module 4 STP And RTP

4.1 STP Intro And Config
4.2 Improve STP Config ­Part 1
4.3 Improve STP Config­ Part 2
4.4 Implement RSTP
4.5 Intro And Config MST

Module 5 Routing

5.1 Config Routing Between VLANs With A Router
5.2 Routing On A Multi Layer Switch
5.3 Routing With An External Router
5.4 Further Routing On Multilayer Switch

Module 6 HSRP, VRRP, GLBP

6.1 Configure And Tune HSRP
6.2 Configure HSRP With Load Balancing
6.3 HSRP For IPv6
6.4 Configure VRRP
6.5 Configure VRRP With Load Balancing
6.6 Implement GLBP
6.7 Configure GLBP

Module 07 Course Review

7.1 Designing Complex Networks
7.2 Review Demo CAM
7.3 Review Demo VLAN’s And Trunking
7.4 Review Demo VTP Configure
7.5 Review Demo Ether Channel And Load Balancing
7.6 Review Demo RSTP
7.7 Review Demo Routing Between VLAN’s With A Router
7.8 Review Demo