CSI ETABS Professional Training Series

"Introduction , Draw grids , Reference planes and points
CSI ETABS - 01 - How to Import Architectural DXF or DWG grid into ETABS | part 1
CSI ETABS - 01 - How to draw grid Lines manually in ETABS | Part 2
CSI ETABS - 01 - Draw General Grid, Reference points & Reference Planes | part 3
New Project
CSI ETABS - 02 - Create New Project (Model) | Part 1
CSI ETABS - 02 - Introduction (Layout) | Part 2
Define Properties, Material, Section, Mass source, Load pattern, load combs
CSI ETABS - 03 - Define material Property | Part 1
CSI ETABS - 03 - Define Section Properties + Section Property Modifiers | Part 2
CSI ETABS - 03 - Load Pattern (Gravity Loads + Earthquake (seismic) Loads |Part3
CSI ETABS - 03 - Wind Loads, with two methods | Part 3
CSI ETABS - 03 - Define Load combination (Manual + Auto) | Part 5
CSI ETABS - 03 - Meshing for Slabs, Walls ,beams and Columns | Part 6
CSI ETABS - 03 - Assign Loads to structure as per ASCE (Part a) | Part 7
CSI ETABS - 03 - Assign Loads on Beam (Point Load, UDL , VDL) (Part b) | Part 8
CSI ETABS - 03 - define Mass Source (For Lateral analysis) | Part 9
CSI ETABS - 03 - Pier Labels and Spandrel Labels (Part 1) | Part 10 M
CSI ETABS - 03 - Pier Labels and Spandrel Labels (Part B) | Part 11
P Delta Analysis Check (How to include P-delta effects)
CSI ETABS - 04 - P Delta Analysis (How to include P-delta effects) | Part 1
CSI ETABS - 04 - P Delta Analysis (How to include P-delta effects) | Part 2
Center of Mass and Center of Rigidity (and Building Eccentricity Check)
CSI ETABS - 05 - Center of Mass and Center of Rigidity Calculations
CSI ETABS - 06 - Building Eccentricity Check (Irregularity check)
Mass (Weight) Irregularity check as per ASCE 7 -16
CSI ETABS - 08 - Mass (Weight) Irregularity check as per ASCE 7 -16
Story Displacement, Story Drift and Story Drift checks as per UBC 97 & ASCE 7-16
CSI ETABS - 09 - Story Displacement, Story Drift and Story Drift Ratio | Part 1
CSI ETABS - 09 - Story Displacement, Story Drift check as UBC 97 | Part 2
CSI ETABS - 09 - Story Drift check as per ASCE-7 16 | Part 3
Torsion Irregularity check
CSI ETABS - 10 - Torsion Irregularity check | Part 1
CSI ETABS - 10 - Torsion Irregularity check | Part 2
Modal Analysis Case [ Eigen or Ritz Vectors ], Time period
CSI ETABS - 11 - Modal Analysis Case [ Eigen or Ritz Vectors ] ,time period
Local and Global Axis (Moment 2-2 3-3 and Shear 2-2 3-3 Understanding
CSI ETABS - 12 - Local and Global Axis (Moment 3-3, Moment 2-2, Shear 2-2,
CSI ETABS - 12 - Beam (Moment 3-3, Shear 2-2) Column (Moment 33,22 Shear 33, Sh
Concrete Slab Design with Strip Based Method and Finite Element Method (FEM)
CSI ETABS - 13 - Concrete Slab Design with Strip Based Method and FEM
Truss Analysis Examples
CSI ETABS - 14 - Truss Analaysis (Example 3.2) book, part 1
CSI ETABS - 14 - Truss Analysis (Example 14.3), part 2
CSI ETABS - 14 - Truss Analysis (Example 14.5) (Settlement) part 3
Steel structure analysis and design
CSI ETABS - 15 - Example 4.1 Anaylze and design of STEEL Beam
Design of Steel Frame Building with connection design
CSI ETABS - 16 - Design of Steel frame building part 1/3
CSI ETABS - 16 - Design of Steel frame building part 2/3
CSI ETABS - 16 - Steel Connection design in ETABS part 3/3
Full building design of TV Studio (with no column in the hall)
CSI ETABS - 17 - Design of TV Studio Building | Part 1
CSI ETABS - 17 - Design of TV Studio Building | Part 2
Equivalent lateral load Analysis Method
CSI ETABS - 18 - Equivalent lateral load or Analysis Method | part 1
CSI ETABS - 18 - Equivalent lateral load or Analysis Method | part 2
Response Spectrum Analysis (RSA) Method
CSI ETABS - 19 - Response Spectrum Analysis (RSA) Method part 1
CSI ETABS - 19 - Response Spectrum Analysis (RSA) Method part 2
Time History Analysis
How to download Earthquake Ground Motion Records
Time History Analysis : Part 1
Time History Analysis : Part 2
Shear Wall Design
Shear Wall Design Example 1 with detail concept.
Shear Wall Design Example 2 with,Simplified C & T, Uniform & General reinforcing
Detailing in ETABS and with Seperate CSI Detailing v3.1 software
CSI ETABS - 23 - Detaling in ETABS and how to read drawings generated
CSI ETABS - 24 - Detaling in ETABS using CSI Detailing 2018 v 3.1
How to open etabs file into different versions
CSI ETABS - 25 - How to open etabs file into different versions"