Engineering and Manufacturing courses Ratcliffe on Soar

...differential pressure •Orifice plates, Venturi, Pitot Tube and square law extraction •Basic principle Vortex and Electromagnetic flow meter Measurement... Learn about: Pressure Transmitter, Process Operators, Pressure Diaphragms...

...into PLC interfacing and control systems •Fully static and function test at the relevant stages... Learn about: Safety Engineering, PLC interface, Motor Types...

...This is typically every two to four years, but is dependant on the frequency that the skills used and the individual’s experience. This course has been... Learn about: Network Training, HV System, HV Operation...

...that are required to work safely and comply with legal obligations. It blends classroom sessions with the opportunity to apply the theory to on-site situations... Learn about: Safety Management, Wind Farm Operations, HV Networks...

...This course covers the underpinning knowledge requirements of the Level 3 NVQ standards in Power Plant Operation and could be tailored to include NVQ assessments... Learn about: Turbine Design, Safety Management, Electrical Theory...

...including: Unit Cold Start-up; Warm Start-up; Hot Start-up; Unit shut-down and two shifting requirements; Dealing with plant contingencies Plant Safety... Learn about: Oil Fired Power Plant, CoalFired Power Plant, Safety Engineering...

...including pressure and temperature transmitters, I to P converters and smart valve positioners •Producing a calibration certificate for a calibrated instrument... Learn about: Beamex MC5, Electrical system, Operations Management...

...Be able to describe the safety and access requirements for HV substations. Be aware of switchgear designs and ratings. Be aware of the requirements... Learn about: Isolation and Earthing, Network Management, High Voltage...

...On completion of the course you should be able to demonstrate a basic understanding of the operation of coal and oil fired Power Plants. Anyone who... Learn about: Turbine plant, Water Chemistry, Water treatment...

...On completion of the course you will be able to demonstrate an understanding of control room operations on a modern coal and oil fired Power Plant. Assistant... Learn about: Turbine plant, Safety Management, Electrical Theory...

...transformer protection and basic generator protection Day 2 •Familiarisation with HV switchgear simulator •Prepare switching schedules and exercises •Fault... Learn about: Low Voltage, Electrical Circuits, Safe Operations...

...Course modules covered in this training: •Module 1 Thermodynamics and Steam Generation (M1) •Module 2 Combustion Chemistry and Boiler Firing Theory (M2)... Learn about: Water Chemistry, Safety Management, Combustion Chemistry...

...Any non-electrical staff that will be required to work on and around electrical machines and equipment. Course modules: •Basic electrical safety •Ohms... Learn about: Basic electrical, AVR Control, Electrical Power Plant for Production...

...enrolling for City & Guilds 6545 Part 2. Course modules: •Overview of CCPP and CHP installations •Legislation and environmental factors •Thermodynamics... Learn about: Plant Operation, Power Plant, Boilers Design...

...Do you work with boiler tubes failures? Do you wish to learn more about their maintenance and operational aspects? The objective of this course is to impart... Learn about: Safety Management, Chemistry Research, Repair Maintenance...

...On completion of the course you should have consolidated and reaffirmed all previous modular training, while gaining further experience in precision operation... Learn about: Coal/Oil Fired Power Plant Operations, Oil Fired Power Plant, Power Plant...