Implementing Cisco Unified Communications Manager Part 2 (CIPT2 v8.0)

Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) v8.0 prepares you for implementing Cisco Unified Communications solution in a multisite environment. It covers globalized call routing, Cisco Service Advertisement Framework (SAF) and Call Control Discovery (CCD), tail-end hop-off (TEHO), Cisco Unified Survivable Remote Site Telephony (SRST), and mobility features such as Cisco Device Mobility and Cisco Extension Mobility. You will apply a dial plan for a multisite environment including TEHO, configure survivability for remote sites during WAN failure and implement solutions to reduce bandwidth requirements in the IP WAN. You will also enable Call Admission Control (CAC) including Session Initiation Protocol (SIP) Preconditions and automated alternate routing (AAR).

Course Objectives
Upon completing this course, the learner will be able to meet these overall objectives:

• Describe multisite deployment issues and solutions, and describe and configure required dial plan elements.
• Implement call-processing resiliency in remote sites by using Cisco Unified SRST, MGCP fallback, and Cisco Unified Communications Manager Express in Cisco Unified SRST mode.
• Implement bandwidth management and CAC to prevent oversubscription of the IP WAN.
• Implement Device Mobility and Cisco Extension Mobility.
• Describe and implement CCD deployments.

Prerequisites
The knowledge and skills that a learner must have before attending this course are as follows:

• Working knowledge of converged voice and data networks.
• Working knowledge of the MGCP, SIP, and H.323 protocols and their implementation on Cisco IOS gateways.
• Ability to configure and operate Cisco routers and switches.
• Ability to configure and operate Cisco Unified Communications Manager in a single-site environment.

Who should attend

• Channel Partner / Reseller
• Customer
• Employee

Course outlineCourse Introduction
Module 1: Multisite Deployment Implementation

• Identifying Issues in a Multisite Deployment
  Identifying Multisite Deployment Solutions
  Implementing Multisite Connections
  Implementing a Dial Plan for International Multisite Deployments

Module 2: Centralized Call-Processing Redundancy Implementation

• Examining Remote Site Redundancy Options
  Implementing SRST and MGCP Fallback
  Implementing Cisco Unified Communications Manager Express in SRST Mode

Module 3: Bandwidth Management and CAC Implementation

• Managing Bandwidth
  Implementing CAC

Module 4: Implementation of Features and Applications for Multisite Deployments

• Implementing Device Mobility
  Implementing Cisco Extension Mobility

Module 5: Call Control Discovery

• Implementing SAF and CCD

Labs

• Lab 1-1: Implementing Basic Multisite Connections
• Lab 1-2: Implementing a Dial Plan for International Multisite Deployments
• Lab 2-1: Implementing SRST and MGCP Fallback
• Lab 2-2: Implementing Cisco Unified Communications Manager Express in SRST Mode
• Lab 3-1: Implementing Bandwidth Management
• Lab 3-2: Implementing CAC
• Lab 4-1: Implementing Device Mobility
• Lab 4-2: Implementing Cisco Extension Mobility
• Lab 5-1: Implementing Cisco SAF and CCD
  

.