Interconnecting Cisco Networking Devices Part 1 - Cisco Networking

Course Content

Interconnecting Cisco Networking Devices Part 1 focuses on providing the skills and knowledge necessary to implement and support a small switched and routed network.

For the purpose of this course, a small network is defined as 1 to 20 hosts connected to a single switch, with the switch running a single VLAN (VLAN1).

The switch is also connected to a router providing a routed link (Routing Information Protocol [RIP] and default) to a simulated Internet and corporate office.

ICND1 works from the bottom up, providing knowledge and skills as they are needed.

The course starts with an introduction to networks. It then introduces host-to-host communications using TCP / IP. Next, Layer 2 devices (switches) are introduced into the network. Next, Layer 3 devices (routers) are introduced into the network.

The introduction of Layer 3 devices leads to the use of WANs and routing to connect the site to the Internet and corporate sites.

Prerequisites

The knowledge and skills that a learner must have before attending this course are as follows:

• Basic computer literacy
• Basic Microsoft Windows navigation skills
• Basic Internet usage skills
• Basic e-mail usage skills

Who Should Attend

• Customer
• Employee

Course Objectives

Upon completing this course, the learner will be able to meet these overall objectives:

• Describe how networks function, identifying major components, function of network components, and the OSI reference model
• Using the host-to-host packet delivery process, describe issues related to increasing traffic on an Ethernet LAN and identify switched LAN technology solutions to Ethernet networking issues
• Describe the reasons for extending the reach of a LAN and the methods that can be used, with a focus on RF wireless access
• Describe the reasons for connecting networks with routers and how routed networks transmit data through networks using TCP / IP
• Describe the function of WANs, the major devices of WANs, and configure PPP encapsulation, static and dynamic routing, PAT, and RIP routing
• Use the command-line interface to discover neighbors on the network and manage the router start up and configuration

Course Outline

• Course Introduction
• Module 1: Building a Simple Network
• Module 2: Ethernet LANs
• Module 3: WLANs
• Module 4: LAN Connections
• Module 5: WAN Connections
• Module 6: Network Environment Management Capstone Lab: Network Environment Management Lab Guide