MH-Training Services courses

...Safety procedures when working near un-supported edges. Safety procedures when operating on inclines. Attaching and Un-attaching different types of bucket...

...Unloading and loading from a transport vehicle. Occupational dermatitis. Pre-use checks test. Multi and Open choice theory test. Practical...

...Location of Training Training can be delivered on-site and off-site depending on customer requirements; training delivered off-site will be more advantageous...

...types of buckets and techniques. Daily pre-use checks and re-fuelling procedures. Set the machine for travel. Travel and operate the machine in confined areas...

...or are required to have “hands on” knowledge and responsibilities involving the safe use of “360° Excavators (Below 10 ton)” used within their workplace environment...

...Travel over different levels of terrain, including undulating ground. Trenching, back-filling, levelling and marking out. Excavating medium and shallow excavations...

...Trainees will have an understanding of the safety rules applicable to operating 180° excavators within their workplace. Introduction to the machine...

...types of buckets and techniques. Daily pre-use checks and re-fuelling procedures. Set the machine for travel. Underground and Overhead obstructions...

...Grade, spread and level; different types of terrain. Place the machine in an out of service condition. Recognise compacted and un-compacted areas...

...Suitable for: Experienced no formal training. Those who have, or are required to have hands on knowledge and responsibilities involving the safe use...

...Trainees will have an understanding of the safety rules applicable to operating tugmsaters within their workplace, including traffic management procedures...

...successfully undertaken and passed the appropriate operator tests in accordance with an accrediting body recognised by the HSE, e.g. ITSSAR...

...Theory and Practical assessments. Instructors Courses are carried out by our fully trained and accredited instructors and the training will be of a high quality standard throughout...

...Correct siting of machines within a working environment. Accidents, causes and prevention. Accurately participate in manoeuvring and travelling the platform...

...Standards and includes both theory and practical assessments leading to a nationally recognised qualification on successful completion...

...of “front dumping dumper trucks “used within their workplace environment. Dumpers (Front Tipping over 3tonne) Aim The aim of the course is to provide selected...

...Equipment Regulations 1998. Regulations Covered Health and Safety at Work Act 1974 etc Lifting Operations Lifting Equipment Regulations 1998 Provision...

...qualification on successful completion as endorsed by the Health & Safety Executive...

...Load handling, identifying load weights. Stacking and de-stacking at ground, eye and high levels. Bulk stacking and de-stacking at various height levels...

...Load Centre and extended boom, de-rating safe working load. Control(s) familiarisation and their functions. Daily pre-use checks and re-fuelling procedures...