Course programme
Introduction to the Routing Course
1 lecture 04:00
Topics Covered in this Course
In this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing Course
Introduction to the Routing Course
1 lecture 04:00
Topics Covered in this Course
In this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing Course
Topics Covered in this Course
In this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing Course
Topics Covered in this Course
In this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing Course
Topics Covered in this Course
In this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing Course
Topics Covered in this Course
In this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing CourseIn this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing CourseIn this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing Course
The Process of Routing
3 lectures 53:35
Understanding the Routing Process
In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.
Default Routing
In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.
Static Routing
In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.
The Process of Routing
3 lectures 53:35
Understanding the Routing Process
In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.
Default Routing
In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.
Static Routing
In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.
Understanding the Routing Process
In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.
Understanding the Routing Process
In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.
Understanding the Routing Process
In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.
Understanding the Routing Process
In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.In this lecture, I will be explaining how a packet gets from source to destination network. I will also be explaining how ARP plays a part in this process using Ethernet networks.
Default Routing
In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.
Default Routing
In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.
Default Routing
In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.
Default Routing
In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.In this lecture, I will be explaining what the purpose of Static Default routing and the different ways of configuring it. We will be creating a lab, so you can gain the understanding of the concepts.
Static Routing
In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.
Static Routing
In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.
Static Routing
In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.
Static Routing
In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.In this lecture, I will be explaining what static routes are, how to configure them and how to use static routes in combination with dynamic routing protocols by changing their administrative distance.
Dynamic Routing with RIPv2
8 lectures 02:01:36
Dynamic Routing VS. Static Routing
In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.
The RIPv2 Routing Protocol
In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.
Configuring RIPv2 Basics
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
Configuring Default Information Sub-Command in RIPv2
In this lecture, we will be configuring an actual static route and advertise it using RIPv2, that way all routers know which way to go to get outside their own routing domain.
Tweaking the Timers in RIPv2
In this lecture, we will be changing the default timers the RIPv2 uses, update, Invalid, hold down and Flush timers and why we would do that.
Passive-Interface Command with RIPv2
In this lecture, I will be explaining how to use the passive interface command and the problems it may cause.
RIPv2 Static Routes as Backup
In this lecture, we will be configuring Default Routes, Static Routes and RIPv2 and see how they can work together.
RIPng Basics
In this lecture, we will simply configure RIPng to an existing network and have a dual stack situation.
Dynamic Routing with RIPv2.
8 lectures 02:01:36
Dynamic Routing VS. Static Routing
In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.
The RIPv2 Routing Protocol
In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.
Configuring RIPv2 Basics
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
Configuring Default Information Sub-Command in RIPv2
In this lecture, we will be configuring an actual static route and advertise it using RIPv2, that way all routers know which way to go to get outside their own routing domain.
Tweaking the Timers in RIPv2
In this lecture, we will be changing the default timers the RIPv2 uses, update, Invalid, hold down and Flush timers and why we would do that.
Passive-Interface Command with RIPv2
In this lecture, I will be explaining how to use the passive interface command and the problems it may cause.
RIPv2 Static Routes as Backup
In this lecture, we will be configuring Default Routes, Static Routes and RIPv2 and see how they can work together.
RIPng Basics
In this lecture, we will simply configure RIPng to an existing network and have a dual stack situation.
Dynamic Routing VS. Static Routing
In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.
Dynamic Routing VS. Static Routing
In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.
Dynamic Routing VS. Static Routing
In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.
Dynamic Routing VS. Static Routing
In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.In this lecture I will be explaining the differences of Dynamic Routing and Static Routing and its advantages and disadvantages.
The RIPv2 Routing Protocol
In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.
The RIPv2 Routing Protocol
In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.
The RIPv2 Routing Protocol
In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.
The RIPv2 Routing Protocol
In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.In this lecture I will be discussing, the many attributes the RIPv2 has and the many ways we can configure RIPv2 in our network. I will also give you a better understanding of 15 hop count limitation.
Configuring RIPv2 Basics
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
Configuring RIPv2 Basics
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
Configuring RIPv2 Basics
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
Configuring RIPv2 Basics
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
In this lecture, we will be configuring RIPv2 with just the basics, so we can get connectivity across the network.
Configuring Default Information Sub-Command in RIPv2
In this lecture, we will be configuring an actual static route and advertise it using RIPv2, that way all routers know which way to go to get outside their own routing domain.
Configuring Default Information Sub-Command in RIPv2
In this lecture, we will be configuring an actual static route and advertise it using RIPv2, that way all routers know which way to go to get outside their own routing domain.
Configuring Default Information Sub-Command in RIPv2
In this lecture, we will be configuring an actual static route and advertise it using RIPv2, that way all routers know which way to go to get outside their own routing domain twork.
Configuring EIGRP with the Variance...
