Course programme
Introduction
1 lecture 09:40
Scope of the course preview
Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.
Introduction
1 lecture 09:40
Scope of the course preview
Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.
Scope of the course preview
Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.
Scope of the course preview
Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.
Scope of the course preview
Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.
Scope of the course preview
Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.Workshop technology is the type of technology which deals with different processes by which component of a machine or equipment are made. In this introductory lecture, we will understand about certain terminologies of a Machine shop, as such Cutting tool,Machine tools,Tool post,Vise,Guideways,Spindles,Arbor etc.
Metal Cutting
7 lectures 21:43
Metal cutting operations
Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.
Cutting tools
Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.
Nomenclature of single point cutting tool
Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.
Tool signature
Tool signature is the numerical code that describes all the key angles of a given cutting tool.
Mechanics of metal cutting
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
Type of chips
Chips formation is part of machining process. It is formed during cutting of workpiece by some mechanical means. The chips depend on the material of work piece,tool and cutting condition. There are mainly three chips types - Continuous,Discontinuous and Continuous with Built Up Edge.
Cutting fluids
Cutting fluids are used in metal machining for a variety of reasons such as improving tool life, reducing workpiece thermal deformation, improving surface finish and flushing away chips from the cutting zone. It also helps in shaping and cutting of metals.
Metal Cutting.
7 lectures 21:43
Metal cutting operations
Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.
Cutting tools
Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.
Nomenclature of single point cutting tool
Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.
Tool signature
Tool signature is the numerical code that describes all the key angles of a given cutting tool.
Mechanics of metal cutting
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
Type of chips
Chips formation is part of machining process. It is formed during cutting of workpiece by some mechanical means. The chips depend on the material of work piece,tool and cutting condition. There are mainly three chips types - Continuous,Discontinuous and Continuous with Built Up Edge.
Cutting fluids
Cutting fluids are used in metal machining for a variety of reasons such as improving tool life, reducing workpiece thermal deformation, improving surface finish and flushing away chips from the cutting zone. It also helps in shaping and cutting of metals.
Metal cutting operations
Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.
Metal cutting operations
Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.
Metal cutting operations
Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.
Metal cutting operations
Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.Cutting processes are those in which a piece of sheet metal is separated by applying a great enough force to caused the material to fail. The most common cutting processes are performed by applying a shearing force, and are therefore sometimes referred to as shearing processes.
Cutting tools
Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.
Cutting tools
Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.
Cutting tools
Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.
Cutting tools
Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.Cutting tools include all of the consumable tooling involved in milling, drilling, turning and other lathe and CNC machining center operations.
Nomenclature of single point cutting tool
Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.
Nomenclature of single point cutting tool
Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.
Nomenclature of single point cutting tool
Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.
Nomenclature of single point cutting tool
Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.Single-point tools are used in turning, shaping, planing and similar operations, and remove material by means of one cutting edge. This lecture discusses the nomenclature of the same.
Tool signature
Tool signature is the numerical code that describes all the key angles of a given cutting tool.
Tool signature
Tool signature is the numerical code that describes all the key angles of a given cutting tool.
Tool signature
Tool signature is the numerical code that describes all the key angles of a given cutting tool.
Tool signature
Tool signature is the numerical code that describes all the key angles of a given cutting tool.Tool signature is the numerical code that describes all the key angles of a given cutting tool.Tool signature is the numerical code that describes all the key angles of a given cutting tool.
Mechanics of metal cutting
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
Mechanics of metal cutting
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
Mechanics of metal cutting
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
Mechanics of metal cutting
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
The mechanism of metal cutting can be explained in a single sentence - "A wedge-shaped tool with a straight cutting edge is made to move relative to the workpiece and a layer of metal called chip is removed."
Type of chips
Chips formation is part of machining process. It is formed during cutting of workpiece by some mechanical means. The chips depend on the material of work piece,tool and cutting condition. There are mainly three chips types - Continuous,Discontinuous and Continuous with Built Up Edge.
Type of chips
Chips formation is part of machining process. It is formed during cutting of workpiece by some mechanical means. The chips depend on the material of work piece,tool and cutting condition. There are mainly three chips types - Continuous,Discontinuous and Continuous with Built Up Edge.
Type of chips
Chips formation is part of machining process. It is formed during cutting of workpiece by some mechanical means internal taper to hold...