-
All
-
Online
-
Filters
Agriculture courses Gunnislake
- Short course
- Gunnislake
- 1 Day
...with and without mounted and trailed implements. Manoeuvring progressing to confined spaces in a forward and reverse direction, with and without mounted and trailed implements...
- Course
- Gunnislake
- 2 Days
...who will then contact you direct to make the necessary arrangements. The PA6 to PA12 tests take approx. 1-2hrs each, PA2 to PA5 tests take 2-3hrs...
- Course
- Gunnislake
- 4 Days
...CPCS assessments available Validity Valid for 5 years Pre-requisites All trainees must be over 16 years of age and in good health. Persons with certain...
- Short course
- Gunnislake
- 1 Day
...Suitable for: Those using a Petrol powered and hand held hedgetrimmer for work purposes. Those using a Petrol powered and hand held hedgetrimmer for work purposes...
- Short course
- Gunnislake
- 1 Day
...More Info Other courses are available specifically for Flail, Ride-on, or tractor mounted/trailed mowers. Course can be adapted to suit individual needs...
- Course
- Gunnislake
- 2 Days
...practical work throughout the course Course Material Workbooks Duration 2 Days Type Workshop & Field Use Certificate Lynher Training or Lantra Awards certificate of attendance...
- Course
- Gunnislake
- 2 Days
...or those wishing to continue to felling trees over 200mm or tree climbing will require a separate NPTC test. Operatives should have a certificate of basic training...
- Course
- Gunnislake
- 4 Days
...Content Summary Introduction & aims Safe working procedures Protective clothing Starting & pre-use checks Practical demonstrations & safe use A Safe working area Preparation...
- Short course
- Gunnislake
- 1 Day
...is preferable . More Info Other similar courses are available for `sit-in` ATV`s, recreational use, or loads & trailers. What you should bring to the Course...
- Course
- Gunnislake
- 2 Days
...Saw chain and power unit Routine maintenance Assembly / re-assembly Safety features Lubrication & fuelling Protective clothing Starting & pre-use checks...
- Course
- Gunnislake
- 4 Days
...felling & de-limbing Storage & transport Legislative issues Pre-Assessment guidance Assessment Separate practical assessment with questions...
- Course
- Gunnislake
- Beginner
- 4 Days
...Content Summary Introduction & aims Workshop Safety Guide bar, Saw chain and power unit Routine maintenance Assembly / re-assembly Safety features Lubrication...
- Course
- Gunnislake
- Beginner
- 2 Days
...(about 3 - 4 hours) on a day following the end of the course - the application process normally take between 2 & 4 weeks but can be arranged sooner...
- Course
- Gunnislake
- Intermediate
- 3 Days
...hazard analysis Preparation, felling & de-limbing Storage & transport Legislative issues Pre-Assessment guidance Assessment Separate practical assessment with questions...
Questions & Answers
Add your question
Our advisors and other users will be able to reply to you