-
All
-
Online
-
Filters
Armada courses
-
I took this course as an introduction to the new version of AutoCAD and I must say it has been highly informative because I ended up with more knowledge (and a big book) that I had before. Thank you!
← | →
-
I’m happy with all the experience on the course. Andy was a very good trainer who explained everything thoroughly and was pretty patient. I think I’ve learnt a lot thanks to this formation that will definitely benefit my career.
← | →
-
I’ve found everything very useful and easy to understand.
← | →
- Training
- Birmingham
- Beginner
- December
- 3 Days
...Point tables User-defined properties Surface modelling Creating surfaces in Civil 3D Refining and editing surfaces Surface styling and analysis Comparing... Learn about: 3d training, Land planning, Surface modelling...
...Point tables User-defined properties Surface modelling Creating surfaces in Civil 3D Refining and editing surfaces Surface styling and analysis Comparing... Learn about: 3d training, Land planning, Surface modelling...
-
I took this course as an introduction to the new version of AutoCAD and I must say it has been highly informative because I ended up with more knowledge (and a big book) that I had before. Thank you!
← | → see all
-
I’m happy with all the experience on the course. Andy was a very good trainer who explained everything thoroughly and was pretty patient. I think I’ve learnt a lot thanks to this formation that will definitely benefit my career.
← | → see all
-
I’ve found everything very useful and easy to understand.
← | → see all
-
Fantastic course which was all around driven by Simon. All angles were clarified properly and made everything simple to grasp.
← | →
-
Highly obliged to you for the 3D laser-printed key dandy - it's extraordinary. Simply needed to say a major thank you for the course, truly relished in it and will keep this into practice.
← | →
-
Awesome course, all learning was agreeable, appropriate and all around exhibited. Feel more sure and eager to utilize CAD when back in the workplace and might truly want to proceed with the learning venture. Andy was a superb educator.
← | →
- Training
- Sheffieldandanother venue.
- Milton Keynes
- December
- 2 Days
...of AutoCAD's 3D modelling capabilities. Delegates can book in any of the following ways: Phone: call 01527 834783. Online. www.armada.co.uk/course/autocad-3d-training... Learn about: 3d training, CAD Software, AutoCAD 3D...
...of AutoCAD's 3D modelling capabilities. Delegates can book in any of the following ways: Phone: call 01527 834783. Online. www.armada.co.uk/course/autocad-3d-training... Learn about: 3d training, CAD Software, AutoCAD 3D...
-
Fantastic course which was all around driven by Simon. All angles were clarified properly and made everything simple to grasp.
← | → see all
-
Highly obliged to you for the 3D laser-printed key dandy - it's extraordinary. Simply needed to say a major thank you for the course, truly relished in it and will keep this into practice.
← | → see all
-
Awesome course, all learning was agreeable, appropriate and all around exhibited. Feel more sure and eager to utilize CAD when back in the workplace and might truly want to proceed with the learning venture. Andy was a superb educator.
← | → see all
-
Great, with a high level of teaching Allowed a good range of topics to suit the specialism of anybody in the room.
← | →
-
The teacher was very easy to get on with. He quickly earned respect and attention of the attendances. His class was easy to understand and if I require further training I would choose Armada again.
← | →
-
Definitely, I will recommend the software to my workplace. Carl has been a great instructor and I would like to pass on my thanks to him. He was extremely patient and knew how to communicate his ideas. Overall, a good experience.
← | →
- Training
- Birminghamand4 other venues
- Milton Keynes, Reading, Sheffield, Bristol
- Beginner
- November
- 3 Days
...Placing Standard Components Using the Content Center Basic Part Design in an Assembly Interacting with an Assembly Identifying Parts in an Assembly Analysis... Learn about: Basic IT training, 3D CAD, Basic IT...
...Placing Standard Components Using the Content Center Basic Part Design in an Assembly Interacting with an Assembly Identifying Parts in an Assembly Analysis... Learn about: Basic IT training, 3D CAD, Basic IT...
-
Great, with a high level of teaching Allowed a good range of topics to suit the specialism of anybody in the room.
← | → see all
-
The teacher was very easy to get on with. He quickly earned respect and attention of the attendances. His class was easy to understand and if I require further training I would choose Armada again.
← | → see all
-
Definitely, I will recommend the software to my workplace. Carl has been a great instructor and I would like to pass on my thanks to him. He was extremely patient and knew how to communicate his ideas. Overall, a good experience.
← | → see all
-
Great course, I’m very pleased with the quality of training, definitely would recommend it.
← | →
-
It has offered me a different approach to the software; I feel I have gained more knowledge and there is not the same pressure to participate in every aspect of the teaching. Thank you!
← | →
-
I have enjoyed this training a lot. I have tried learning Autodesk Software on my own using online resources prior to this course but often found myself a little lost. Having a competent professional teaching this particular software was far more effective and certainly affordable.
← | →
- Training
- Birminghamandanother venue.
- Milton Keynes
- Beginner
- November
- 3 Days
...address, email address, contact phone number and the date of the course you want to attend to training@armada.co.uk. Building Information Modelling Building... Learn about: Building Information Modeling, 3d art, 3d training...
...address, email address, contact phone number and the date of the course you want to attend to training@armada.co.uk. Building Information Modelling Building... Learn about: Building Information Modeling, 3d art, 3d training...
-
Great course, I’m very pleased with the quality of training, definitely would recommend it.
← | → see all
-
It has offered me a different approach to the software; I feel I have gained more knowledge and there is not the same pressure to participate in every aspect of the teaching. Thank you!
← | → see all
-
I have enjoyed this training a lot. I have tried learning Autodesk Software on my own using online resources prior to this course but often found myself a little lost. Having a competent professional teaching this particular software was far more effective and certainly affordable.
← | → see all
-
Excellent training center.
← | →
-
The teacher was very knowledgeable, good at keeping peoples' attention and creating a good level of complicity during the session.
← | →
-
Amazing teacher, I learnt a lot of useful things to go with and feel a lot more confident with my skills.
← | →
- Training
- Birminghamandanother venue.
- Milton Keynes
- Beginner
- December
- 2 Days
...you should contact Armada Training Centre through Emagister.co.uk right now! The opportunities are on the palm of your hand. - To gain a thorough grounding in Adobe Photoshop... Learn about: Image correction, Communication design, Image Editing...
...you should contact Armada Training Centre through Emagister.co.uk right now! The opportunities are on the palm of your hand. - To gain a thorough grounding in Adobe Photoshop... Learn about: Image correction, Communication design, Image Editing...
-
Excellent training center.
← | → see all
-
The teacher was very knowledgeable, good at keeping peoples' attention and creating a good level of complicity during the session.
← | → see all
-
Amazing teacher, I learnt a lot of useful things to go with and feel a lot more confident with my skills.
← | → see all
-
Rod Cleasby is knowledgeable, patient, and communicative. The best training I have to date (and I have tried a few!)
← | →
-
I think Stewart is a great tutor who is able to put the training and objectives of the course into practice. I have enjoyed learning 3DS Max!
← | →
-
Excellent instructor and venue, it helped me to remember the fundamentals of the program.
← | →
- Training
- Birminghamand2 other venues
- Milton Keynes, Bristol
- Beginner
- November
- 3 Days
...Newcomers to 3ds Max. - Game developers. - Artists and animators who produce film and video content. - Architects, designers and engineers. Delegates... Learn about: 3DS Max, 3d training, 3D Modelling...
...Newcomers to 3ds Max. - Game developers. - Artists and animators who produce film and video content. - Architects, designers and engineers. Delegates... Learn about: 3DS Max, 3d training, 3D Modelling...
-
Rod Cleasby is knowledgeable, patient, and communicative. The best training I have to date (and I have tried a few!)
← | → see all
-
I think Stewart is a great tutor who is able to put the training and objectives of the course into practice. I have enjoyed learning 3DS Max!
← | → see all
-
Excellent instructor and venue, it helped me to remember the fundamentals of the program.
← | → see all
-
Thank you very much for a very interesting and extremely well delivered course. I totally appreciated the methodical way you delivered the course.
← | →
-
Pretty interesting course and the attentions they gave us was great.
← | →
-
The course was excellent. I didn’t have enough previous experience but I have learnt a lot from being here.
← | →
- Training
- Sheffield
- Beginner
- September
- 2 Days
...options Creating aggregator projects Miscellaneous... Learn about: Adobe Photoshop, Communication design, E-learning content...
...options Creating aggregator projects Miscellaneous... Learn about: Adobe Photoshop, Communication design, E-learning content...
-
Thank you very much for a very interesting and extremely well delivered course. I totally appreciated the methodical way you delivered the course.
← | → see all
-
Pretty interesting course and the attentions they gave us was great.
← | → see all
-
The course was excellent. I didn’t have enough previous experience but I have learnt a lot from being here.
← | → see all
-
This course is truly valuable for the tenderfoots who have actually zero learning of AutoCAD. Carl has been incredible educator. He has been extremely quiet and truly energetic about sharing his insight. Towards the end of the course I have feeling that I have great working information of AutoCAD and it might motivate me in future to accomplish more advance courses in AutoCAD.
← | →
-
Carl is an exceptionally educated teacher and makes the course extremely intriguing and important, the offices are incredible as well as the welcoming was splendid.
← | →
-
The course was extremely educative, relish able and will be exceptionally helpful for my work. Geoff, the educator had an extraordinary way and was clear in his clarifications. I mean to investigate AutoCAD in more detail succeeding this course.
← | →
- Training
- Sheffield
- Intermediate
- December
- 3 Days
...Draw orderUser Coordinate Systems (UCS) Working with the World Coordinate System (WCS) Setting custom UCS Saving multiple UCS Importing PDF files Controlling... Learn about: Computer Aided Design, CAD Software, 3d training...
...Draw orderUser Coordinate Systems (UCS) Working with the World Coordinate System (WCS) Setting custom UCS Saving multiple UCS Importing PDF files Controlling... Learn about: Computer Aided Design, CAD Software, 3d training...
-
This course is truly valuable for the tenderfoots who have actually zero learning of AutoCAD. Carl has been incredible educator. He has been extremely quiet and truly energetic about sharing his insight. Towards the end of the course I have feeling that I have great working information of AutoCAD and it might motivate me in future to accomplish more advance courses in AutoCAD.
← | → see all
-
Carl is an exceptionally educated teacher and makes the course extremely intriguing and important, the offices are incredible as well as the welcoming was splendid.
← | → see all
-
The course was extremely educative, relish able and will be exceptionally helpful for my work. Geoff, the educator had an extraordinary way and was clear in his clarifications. I mean to investigate AutoCAD in more detail succeeding this course.
← | → see all
-
Everything was explained clearly and would be helpful to anyone regardless of experience.
← | →
-
Excellent pace of training with expert instruction.
← | →
-
The training carried out was very engaging. The trainer was absolutely brilliant in the way the material was delivered, explained and shown. One of the best training courses I have been on.
← | →
- Training
- Bristolandanother venue.
- Milton Keynes
- Beginner
- December
- 2 Days
...Importing After Effects Compositions Importing Premiere Pro Projects and Project Collaboration Workflows Utilising Premiere Pro Projects in Adobe Media... Learn about: Image Editing, Adobe Premiere, After Effects training...
...Importing After Effects Compositions Importing Premiere Pro Projects and Project Collaboration Workflows Utilising Premiere Pro Projects in Adobe Media... Learn about: Image Editing, Adobe Premiere, After Effects training...
-
Everything was explained clearly and would be helpful to anyone regardless of experience.
← | → see all
-
Excellent pace of training with expert instruction.
← | → see all
-
The training carried out was very engaging. The trainer was absolutely brilliant in the way the material was delivered, explained and shown. One of the best training courses I have been on.
← | → see all
-
The instructions are easy to follow, everything is explained in detail.
← | →
-
The instructor was approachable and knowledgeable. His training style was totally professional as he was always happy to answer questions. The facilities were excellent and Emily was particularly welcoming and friendly on Day 1. I would definitely recommend this centre to others.
← | →
-
It was highly informative, the trainer is very wise, he masters the subject and industry in general.
← | →
- Training
- Bristol
- Beginner
- December
- 2 Days
...so we can give you the most relevant information about this course. -Creating 3D models in SketchUpCreate 3D models. -Using SketchUp for textures... Learn about: 2D Drawing, 3d training, Computer Aided Design...
...so we can give you the most relevant information about this course. -Creating 3D models in SketchUpCreate 3D models. -Using SketchUp for textures... Learn about: 2D Drawing, 3d training, Computer Aided Design...
-
The instructions are easy to follow, everything is explained in detail.
← | → see all
-
The instructor was approachable and knowledgeable. His training style was totally professional as he was always happy to answer questions. The facilities were excellent and Emily was particularly welcoming and friendly on Day 1. I would definitely recommend this centre to others.
← | → see all
-
It was highly informative, the trainer is very wise, he masters the subject and industry in general.
← | → see all
-
Excellent introduction to Dreamweaver.
← | →
-
This was perfect for a novice. I now have a very good understanding of the product.
← | →
- Training
- Birmingham
- Beginner
- October
- 1 Day
...some of the UK's best and brightest technical authors. With our Introduction to Technical Authoring Course you will receive comprehensive training... Learn about: User documentation, Basic Skills, Quality Training...
...some of the UK's best and brightest technical authors. With our Introduction to Technical Authoring Course you will receive comprehensive training... Learn about: User documentation, Basic Skills, Quality Training...
-
Excellent introduction to Dreamweaver.
← | → see all
-
This was perfect for a novice. I now have a very good understanding of the product.
← | → see all
-
Great course. Not just have I adapted more about the usefulness of AutoCAD, however with Carls cognitive content and experience of the software I feel that it will enhance my work process. 10 out of 10.
← | →
-
The teacher (Stewart) was the genuine addition to purpose of this course. He went at precisely the right pace, was concerned in ensuring all members had effectively finished every procedure and was exceptionally congenial. I express this as a previous instructor with 10 years of experience. Should the need emerge for further Autodesk programming preparing, I would make Armada my first port of call.
← | →
-
Good. Simon took what could be an extremely exhausting course and made it intriguing and kept me locked in. I adapted faster than anticipated and will return for the accompanying courses.
← | →
- Training
- Birminghamand3 other venues
- Reading, Sheffield, Bristol
- December
- 3 Days
...multileaders Hatching Objects Hatching objects Editing hatch objects Working with reusable content Creating and inserting blocks and symbols Editing blocks... Learn about: AutoCAD 2D, CAD Software, 2D Drawing...
...multileaders Hatching Objects Hatching objects Editing hatch objects Working with reusable content Creating and inserting blocks and symbols Editing blocks... Learn about: AutoCAD 2D, CAD Software, 2D Drawing...
-
Great course. Not just have I adapted more about the usefulness of AutoCAD, however with Carls cognitive content and experience of the software I feel that it will enhance my work process. 10 out of 10.
← | → see all
-
The teacher (Stewart) was the genuine addition to purpose of this course. He went at precisely the right pace, was concerned in ensuring all members had effectively finished every procedure and was exceptionally congenial. I express this as a previous instructor with 10 years of experience. Should the need emerge for further Autodesk programming preparing, I would make Armada my first port of call.
← | → see all
-
Good. Simon took what could be an extremely exhausting course and made it intriguing and kept me locked in. I adapted faster than anticipated and will return for the accompanying courses.
← | → see all
-
The course was excellent, very knowledgeable trainer who answered most of our questions and showed us particular aspects that people asked about. In addition the facilities were fantastic.
← | →
- Training
- Birminghamand4 other venues
- Milton Keynes, Reading, Sheffield, Bristol
- Beginner
- December
- 2 Days
...layers to group and separate objects Working with the layers palette Creating layers Moving and copying objects between layers Merging and deleting layers... Learn about: Communication design, Desktop Publishing, Electronic Publishing...
...layers to group and separate objects Working with the layers palette Creating layers Moving and copying objects between layers Merging and deleting layers... Learn about: Communication design, Desktop Publishing, Electronic Publishing...
-
The course was excellent, very knowledgeable trainer who answered most of our questions and showed us particular aspects that people asked about. In addition the facilities were fantastic.
← | →
-
The trainer was knowledgeable and used his own experience to demonstrate a point
← | →
- Training
- Birminghamandanother venue.
- Milton Keynes
- Advanced
- Different dates available
- 1 Day
...Are you interested in improving your skills and techniques? Do you want to learn everything about Photoshop? If the answer is yes, this programme is made for... Learn about: Adobe Photoshop, Image correction, Image creation...
...Are you interested in improving your skills and techniques? Do you want to learn everything about Photoshop? If the answer is yes, this programme is made for... Learn about: Adobe Photoshop, Image correction, Image creation...
-
The trainer was knowledgeable and used his own experience to demonstrate a point
← | →
-
The AutoCAD Intermediate course has filled in the gaps in my AutoCAD knowledge
← | →
- Training
- Birminghamand2 other venues
- Milton Keynes, Sheffield
- September
...The techniques you will learn include: -Handling colour with confidence. -Harnessing the power of stylesheets. -Streamlining your workflow and improving productivity... Learn about: Creative Suite, Desktop Publishing, Electronic Publishing...
...The techniques you will learn include: -Handling colour with confidence. -Harnessing the power of stylesheets. -Streamlining your workflow and improving productivity... Learn about: Creative Suite, Desktop Publishing, Electronic Publishing...
-
The AutoCAD Intermediate course has filled in the gaps in my AutoCAD knowledge
← | →
-
The trainer of the AutoCAD 3D training course was very patient and helpful.
← | →
- Training
- Birminghamand2 other venues
- Milton Keynes, Reading
- September
...of the built-in 3D Cameras Tracker effect. Exclude objects and people from the tracker and specify regions to track using masks Mocha for After Effects... Learn about: Explainer videos, Image Editing, After Effects training...
...of the built-in 3D Cameras Tracker effect. Exclude objects and people from the tracker and specify regions to track using masks Mocha for After Effects... Learn about: Explainer videos, Image Editing, After Effects training...
-
The trainer of the AutoCAD 3D training course was very patient and helpful.
← | →
-
I’m very pleased with the AutoCAD Essentials course. The trainer was a very good teacher and extremely patient. Thank you!
← | →
- Training
- Birminghamand2 other venues
- Reading, Bristol
- Beginner
- 2 Days
...Isolation mode Compound paths Symbols Creating symbols Updating symbols Sharing symbols Layers Stacking order Controlling layers Saving and file formats Saving... Learn about: Creative techniques, Web graphics, Vector graphics...
...Isolation mode Compound paths Symbols Creating symbols Updating symbols Sharing symbols Layers Stacking order Controlling layers Saving and file formats Saving... Learn about: Creative techniques, Web graphics, Vector graphics...
-
I’m very pleased with the AutoCAD Essentials course. The trainer was a very good teacher and extremely patient. Thank you!
← | →
-
The course was great, very knowledgeable trainer who answered most of our inquiries.
← | →
- Training
- Birminghamand2 other venues
- Milton Keynes, Reading
- Beginner
- November
- 3 Days
...Emagister add to its the catalog the Autodesk Revit MEP Essentials Course, which aims to teach the basic concepts of the software. Our three day Revit... Learn about: Building Information Modeling, Construction Training...
...Emagister add to its the catalog the Autodesk Revit MEP Essentials Course, which aims to teach the basic concepts of the software. Our three day Revit... Learn about: Building Information Modeling, Construction Training...
-
The course was great, very knowledgeable trainer who answered most of our inquiries.
← | →
-
The course was extremely helpful. I had used the system on a very basic level before this session, but now I feel more confident.
← | →
- Training
- Bristolandanother venue.
- Milton Keynes
- December
- 2 Days
...the motion graphics and visual effects software to beat. With this Introduction to After Effects course you will receive comprehensive training in after... Learn about: After Effects training, Adobe After Effects, Motion graphics...
...the motion graphics and visual effects software to beat. With this Introduction to After Effects course you will receive comprehensive training in after... Learn about: After Effects training, Adobe After Effects, Motion graphics...
-
The course was extremely helpful. I had used the system on a very basic level before this session, but now I feel more confident.
← | →
-
I came to the Introduction to technical authoring course with an open mind not knowing if the content would be applicable. I found the course both interesting and relevant.
← | →
- Short course
- Milton Keynes
- Advanced
- October
- 2 Days
...Course Programme Getting started General introduction Defining discipline settings View control Working with architects and engineers Linking Revit models... Learn about: Image Editing, Building Information Modeling, Electrical Circuits...
...Course Programme Getting started General introduction Defining discipline settings View control Working with architects and engineers Linking Revit models... Learn about: Image Editing, Building Information Modeling, Electrical Circuits...
-
I came to the Introduction to technical authoring course with an open mind not knowing if the content would be applicable. I found the course both interesting and relevant.
← | →
Questions & Answers
Add your question
Our advisors and other users will be able to reply to you