Business courses Stockton-on-Tees

...Course Objectives This course is aimed at staff from any sector with no supervisory or managerial responsibilities. It provides grounding in the essentials...

...with an awareness of stress and techniques that maybe employed by managers in order to minimise and recognise stress within the workplace...

...and to make delegates aware of accidents/injuries that can occur whilst handling or moving materials and objects. It is also to train delegates in... Learn about: Manual Handling...

...The aims of this course are to make delegates aware of the Manual Handling Operations Regulations 1992 (as amended) and to make delegates aware of accidents/injuries... Learn about: Manual Handling...

...Understand the importance of effective Safety Management and the systems to measure performance...

...To provide delegates with a greater understanding of Permit to Work Systems. Course Objectives On completion of this Training Course, delegates shall be able...

...HASWA 1974 and other relevant legislation. PPE as a “last resort”. Provision, Maintenance and Replacement. Quality and Compatibility of PPE...

...delegates will: Have an awareness of RIDDOR Understand their responsibilities for reporting under the Regulations Be able to complete F2508 Reporting Forms... Learn about: Accident Investigation...

...On completion of the course, delegates will have an understanding of: The aims and objectives of Risk Management. Definitions. Principles of Risk Assessment...

...Advise on and implement controls in the workplace to reduce stress. Monitor colleagues and themselves in relation to stress at work The aim of this course...

...encounter asbestos in the workplace. This course is NOT intended to equip delegates with the specialist knowledge needed to perform type 2 and 3 surveys...

...work and safety management techniques. Course Objectives On completion of the course candidates will be aware of: The health and safety at work act...

...in a safe and correct manner Course Objectives At the conclusion of this course the delegate will be capable of correctly and safely: Selecting and using...

...MHSWR. PUWER. Competent Persons. Organising of Lifting Operations. Keeping Records. Approved codes of practice and guidance The aim of the course is...

...an introduction to and a broad overview off the Provision and Use of Work Equipment Regulations 1998. (PUWER) and the Lifting Operation and Lifting Equipment...

...in the use of lifting and rigging out of balance loads. Performing simple calculations used in lifting and rigging. The document control required for lifting equipment...

...of gravity of loads and taking these factors into account of slinging and moving same. They will also have a working knowledge of all relevant current...

...Course Objectives At the conclusion of this course the delegate will be capable of correctly and safely: Selecting and using wire rope slings/fibre slings...