Construction Trades inhouse

...Modules will consist of Soldered Joints External Corners Reverse Expansion Soakers & Step flashing Back gutter soldered & welted Pike jaw fixing Flat vented... Learn about: City & Guilds Acceditation, Hard Metal...

...e.g. ITSSAR etc. Suitable for: Experienced no formal training. Those who have, or are required to have 'hands on' knowledge and responsibilities involving...

...In fact anywhere where a safe system of work is required above the ground ranging from high elevated maintenance works to the safe rigging up and dismantling...

...disturb the fabric of a building which may contain asbestos must have had at least a basic Awareness course. It is adviseable managers attend the course...

...with BS7671 of the Wiring Regulations 2008 who achieved the previous award City and Guilds 2381 16th Edition later after July 1st 2001 This course is aimed...

...e.g. ITSSAR etc. Suitable for Novice- Operators (No formal training whatsoever). Those who have, or are required to have 'hands on' knowledge and responsibilities...

...in either maintenance or contracting and who need to undertake the testing of portable equipment. This course is ideally suited for all those with an appreciation...

...coverage includes training to instructor level, updating statutory requirements, safety and training standards, classroom techniques, testing methods...

...All courses are Independent Training Standard Scheme & Register (ITSSAR) , approved by HSE, or to RTITB standards . References to HSE's Safety in Working...

...involving the safe use of 'skid steer loading shovels' used within their workplace environment. Refresher / Persons with experience and trained Those who...

...for Part P Registration will benefit from this course. Contractors applying for registration with a Domestic Installer Self-Certification Scheme may benefit from this course...

...On completion of the course you will understand the statutory requirements and the need for safety training. The course covers principal components and terminology...

...(NPTC CS39) You are viewing our most recent information for Chainsaw - Use of a Chainsaw from a Rope & Harness (NPTC CS39). Who should enrol Anyone climbing...

...or are required to have 'hands on' knowledge and responsibilities involving the safe use of 'counter-balanced forklifts' used within their workplace environment...

...There are no pre-entry qualifications as everything that the candidate needs to know is covered in the course. Candidates must be able to develop competency...

...· Correct storage and selection of brazing consumables · Welds to be completed on materials ranging from 1mm-3mm thick or above as appropriate to delegates...

...Ceiling Fixing, Dry-Lining, Painting & Decorating, Wall & Floor Tiling, Solid Plastering and General Construction Operations...

...Those who have, or are required to have 'hands on' knowledge and responsibilities involving the safe use of 'counter-balanced forklifts' used within their workplace environment...

...for plumbers and heating engineers with little or no prior experience of working in the gas industry, its aim is to provide you with the theoretical understanding...

...that users of work equipment receive adequate training for purposes of health and safety. This includes training in the methods which may be adopted when using work equipment...