-
All
-
Online
-
Filters
-
Location
-
Type of studies
-
+ Filters (1)
NETA Training courses
- Training
- Blended in Stockton-on-tees
- 5 Days
...required angles, how to use sling charts Typing knots, bends and hitches Lifting safely both out of balance loads, balanced loads and tandem lifting...
- Training
- Blended in Stockton-on-tees
- 2 Days
...for the lifting operation Will be able to identify the purpose and capacity of lifting tackle in general use for lifting The correct method of handling...
- Training
- Blended in Stockton-on-tees
- 1 Day
...in a safe and correct manner Course Objectives At the conclusion of this course the delegate will be capable of correctly and safely: Selecting and using...
- Training
- Stockton-on-tees
- 1 Day
...when using Pendant Crane including the use of hand signals. Safety of others in Workshop Area. Team Working. Practical slinging and operating exercises...
- Training
- Stockton-on-tees
- 1 Day
...in the use of lifting and rigging out of balance loads. Performing simple calculations used in lifting and rigging. The document control required for lifting equipment...
- Training
- Blended in Stockton-on-tees
- 2 Days
...legislation relating to lifting and slinging and of general site and workshop safety standards. The aim of the course is to enhance skills, enabling tasks...
- Training
- Blended in Stockton-on-tees
- 3 Days
...Use of general rigging equipment. Calculating the weights and centres of gravity of loads and taking these factors into account of slinging and moving...
- Training
- Billingham
- 3 Days
...On completion of this training course each delegate should be capable of: Understanding the requirements of the Regulations. Checking requirements for a Standard Installation...
- Training
- Billingham
- 1 Day
...from 16th Edition IEE Wiring Regulations to the 17th Edition IEE Wiring Regulations...
- Training
- Billingham
- 2 Days
...Follow suitable inspection and testing techniques for the requirements of the AM2 test. Apply a Logical Approach to Fault Finding. Have the theoretically...
- Training
- Billingham
- 10 Days
...On completion of Part B the delegates should be able to. Work safely on electrical equipment within the scope of the Electricity at Work Regulations...
- Training
- Billingham
- Beginner
- 5 Days
...Understand & identify typical electrical components found within a motor control panel. Understand the general principles & construction of AC motors...
- Training
- Billingham
- 4 Days
...to obtain the 2391 qualification This is an advanced course for experienced supervisors / electricians who are currently involved in inspection and testing of electrical installations...
- Training
- Billingham
...experience of flammable atmosphere installations Delegates must have a recognised Electrical or Instrument background with practical experience of flammable...
- Training
- Billingham
- 2 Days
...Course Objectives. On successful completion of the course assessment the delegate will have an understanding of: Ex01R - Installation practices for Ex'd'...
- Training
- Billingham
- 2 Days
...give personnel an understanding of the requirements of safe working in a potentially explosive atmosphere. The course has been designed specifically for non-technical personnel...
- Training
- Billingham
- 3 Days
...atmospheres containing combustible...
- Training
- Billingham
- 5 Days
...of instrument process measurement Delegates should have an understanding of instrument process measurement The aim of this course is to enhance the skills...
- Training
- Billingham
- 1 Day
...This ECITB Renewal training programme has been designed to provide essential knowledge and understanding of health and safety for employees working...
- Training
- Billingham
- 2 Days
...The learning outcomes of the CCNSG Nationally Accredited Safety Passport course are to increase awareness of health, safety and welfare and environmental issues... Learn about: No previous knowledge is required, Some knowledge of site safety is advantageous...