-
All
-
Online
-
Filters
-
Location
-
Type of studies
-
+ Filters (1)
NETA Training courses
- Training
- Blended in Stockton-on-tees
- 5 Days
...required angles, how to use sling charts Typing knots, bends and hitches Lifting safely both out of balance loads, balanced loads and tandem lifting...
- Training
- Blended in Stockton-on-tees
- 2 Days
...This course is intended for personnel who will be required to act on the instructions of an Appointed Person in order to supervise lifting operations...
- Training
- Blended in Stockton-on-tees
- 1 Day
...cranes Calculating the weights and centres of gravity of loads and taking these factors into account of slinging and moving same They will also have...
- Training
- Stockton-on-tees
- 1 Day
...including the correct use of angles#. Pre operational checks The aim of the course is to give occasional users an awareness of the correct and safe method...
- Training
- Stockton-on-tees
- 1 Day
...On completion of the refresher course training the trainee should be capable of: Be aware of the relevant regulations currently in use on Construction Sites...
- Training
- Blended in Stockton-on-tees
- 2 Days
...Using 'Safe Working Load' Charts. Slinging and moving loads. Assisting with cranes and the correct use of hand signals. Calculating the weights and centres...
- Training
- Blended in Stockton-on-tees
- 3 Days
...Course Objectives At the conclusion of this course the delegate will be capable of correctly and safely: Selecting and using wire rope slings/fibre slings...
- Training
- Billingham
- 3 Days
...On completion of this training course each delegate should be capable of: Understanding the requirements of the Regulations. Checking requirements for a Standard Installation...
- Training
- Billingham
- 1 Day
...Understanding the general characteristics of an installation. Complete a 1 hour 30 Question on-line examination To provide a working knowledge of the changes...
- Training
- Billingham
- 2 Days
...Training Skills and Knowledge required to sit the AM2 Skill...
- Training
- Billingham
- 10 Days
...RCD's and circuit breakers and be able to select the correct device to satisfy the IEE Regulations.Make up a range of plugs, leads and sockets to correct...
- Training
- Billingham
- Beginner
- 5 Days
...the isolation & de-isolation of an A.C. induction motor. Suitable for: Delegates will ideally be from a craft engineering discipline Delegates will ideally...
- Training
- Billingham
- 4 Days
...17th edition IEE Wiring Regs. To successfully carryout the practical assessments and written examination as required by City & Guilds, to obtain the...
- Training
- Billingham
...experience of flammable atmosphere installations Delegates must have a recognised Electrical or Instrument background with practical experience of flammable...
- Training
- Billingham
- 2 Days
...This course is for personnel who wish to update and refresh their knowledge and skills in the use of electrical and instrument apparatus within potentially...
- Training
- Billingham
- 2 Days
...vapours & dusts. the basic principles of area classification including zones, apparatus groups & temperature classification. the types of protection...
- Training
- Billingham
- 3 Days
...Presence of Combustible Dusts. Suitable for: Delegates must have a recognised Electrical or Instrument background with practical experience of flammable atmosphere installations...
- Training
- Billingham
- 5 Days
...process industry to include all safety issues. Confirm understanding of the need to transmit representative signals of the process medium. Understand control valve selection...
- Training
- Billingham
- 1 Day
...and familiarity with relevant legislation. Upon completion of this training course delegates will be able to: - * Therefore show a level of under standing...
- Training
- Billingham
- 2 Days
...so that after an appropriate site induction candidates will be able to work at significant less risk to themselves and others... Learn about: Some knowledge of site safety is advantageous, No previous knowledge is required...