Training in Cleveland

...the requirements of the appropriate part of the Health and Safety At Work Act 1974. Understanding/interpreting the Manual Handling Operations Regulations... Learn about: Manual Handling...

...Understanding/interpreting the Manual Handling Operations Regulations 1992 (as amended). Carrying out Manual Handling Assessments (MAC Assessment tool)... Learn about: Manual Handling...

...To provide delegates with a general understanding of the skills and knowledge required by a Safety Representative. To effectively represent their constituents...

...types of Permits used. Implement procedures under which a Permit to Work System should be used. Understand the Legal Requirements relating to Permit to Work Systems...

...On completion of the course delegates will be aware of: What and who PPE applies to. HASWA 1974 and other relevant legislation. PPE as a 'last resort'...

...Be able to state the definition of an accident Discuss legal procedures in relation to Industrial Accidents Discuss factors contributing to accidents... Learn about: Accident Investigation...

...(HSE Model) There are many ways that companies evaluate risk, prior arrangements can be made to meet with company representatives to introduce their systems...

...is to raise the awareness of likely sources of work related stress, the range of symptoms and effects it can cause and the options available for its control...

...or conduct the removal of items such a asbestos insulation, Asbestos insulating board and asbestos coatings, this work is governed by strict regulations...

...Promote leadership and ownership of health and safety issues Explain the HSE’s guidance document upon responsibilities Understand HSE enforcement policy...

...work and safety management techniques. Course Objectives On completion of the course candidates will be aware of: The health and safety at work act...

...Understand how to lead an effective team Understand the different personalities in their team Be aware of the importance of Time Management Understand...

...to carry out the duties of the Appointed Person as defined in BS7121 Part 1 and BS7121 Part 3. Course Objectives On successful completion of this course candidates will...

...required angles, how to use sling charts Typing knots, bends and hitches Lifting safely both out of balance loads, balanced loads and tandem lifting...

...The aim of this course is to provide uniformity of training to a recognised standard and to provide selected personnel with the knowledge and skills needed...

...Selecting and using chains and chain slings Selecting and using wire rope slings Using 'Safe Working Load' Charts Slinging and moving loads Working...

...give delegates an introduction to and a broad overview off The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)...

...an introduction to and a broad overview off the Provision and Use of Work Equipment Regulations 1998. (PUWER) and the Lifting Operation and Lifting Equipment...

...To be able to demonstrate both theoretically and practically the use of pendant operation and slinging methods to move loads. Explain and demonstrate range...

...in the use of lifting and rigging out of balance loads. Performing simple calculations used in lifting and rigging. The document control required for lifting equipment...